- Other Fluke companies:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
See more Fluke brands
Inexpensive, easy-to-use fixed-point maintenance apparatus
- Easy preprogrammed realization
- Inexpensive fixed-point solution
- Training takes a few hours
If the reason you don’t use fixed-point cells is because they’re too expensive or too difficult to use, you haven’t heard of Fluke Calibration's mini fixed-point apparatus.
The triple point of water (0.01 °C) is one of the most important temperatures on the ITS-90. Unfortunately, realizing and maintaining triple point of water cells hasn’t always been convenient or cost-effective.
Because ITS-90 calibrations require frequent measurements at the triple point of water, and because the triple point of water is often used as a statistical check against the drift of a temperature standard, it is important to be able to realize and maintain well-constructed triple point of water cells easily.
The Fluke Calibration 9210 TPW Maintenance Apparatus provides built-in programming for the simple supercool-and-shake realization and maintenance of our 5901B Mini TPW Cell. Simply insert the cell, enter the “freeze" mode through the front-panel buttons, have your morning cup of coffee, and when the 9210 audibly alerts you, remove the Mini TPW Cell and give it a shake to initiate freezing a portion of the water. Re-insert the cell, change the program mode to “maintain," and you’ve got 0.01 °C for the rest of the day with uncertainty of only ±0.0005 °C.
Precision-machined thermal blocks can also be used to take advantage of the excellent stability and uniformity of the 9210 for performing comparison calibrations. Multi-hole and custom blocks are available with 178 mm (7 in) depths.
Specifications |
|
| Temperature Range | –10 °C to 125 °C |
| Ambient Operating Range | 5 °C to 45 °C |
| Stability | ±0.02 °C |
| Vertical Gradient | ±0.05 °C over 100 mm at 0 °C |
| Plateau Duration | 6–10 hours, typical |
| Resolution | 0.01 ° (0.001 ° in program mode) |
| Display Scale | °C or °F, switchable |
| Immersion Depth | 171 mm (6.75 in) in optional comparison block |
| Stabilization Time | 15 minutes nominal |
| Preheat Wells | 3 wells (for 3.18, 6.35, or 7.01 mm probes [0.125, 0.25, 0.276 in]) |
| Fault Protection | Adjustable software cutout using control probe; separate circuit thermocouple cutout for maximum instrument temperature |
| Display Accuracy | ±0.25 °C |
| Comparison Block | Three multi-hole blocks, blanks, and custom blocks available |
| Well-to-Well Gradient (in comparison block) |
±0.02 °C |
| Heating Time | Ambient to 100 °C: 45 min. |
| Cooling Time | Ambient to –5 °C: 25 min. |
| Comm. | RS-232 included |
| Power Requirements |
115 VAC (±10 %), 60 Hz, 1.5 A, or 230 VAC (±10 %), 50 Hz, 0.75 A, 170 W |
| Exterior Dimensions (HxWxD) | 489 x 222 x 260 mm (19.25 x 8.75 x 10.25 in) |
| Weight | 7 kg (15.5 lb.) with block |
| Accessory | Description |
|---|---|
| 3110-1 |
Comparison Insert, Blank |
| 3110-2 |
Comparison Insert A, holes at 1.6 mm, 3.2 mm, 4.76 mm, 6.35 mm, 9.5 mm, and 12.7 mm (1/16, 1/8, 3/16, 1/4, 3/8, and 1/2 in) |
| 3110-3 |
Comparison Insert B, 2 holes at 4.76 mm (3/16 in), 2 at 6.35 mm (1/4 in), and 2 at 9.5 mm (3/8 in). |
| 3110-4 |
Comparison Insert C, 6 holes at 6.35 mm (1/4 in) |
| Priority Gold Instrument CarePlan |
Fluke Calibration Priority Gold Instrument CarePlans are available for most calibration products. Please contact your local Fluke Calibration sales representative for details or to request a quote. You may also call the Customer Care Center at 877-355-3225 or send email to [email protected]. |
| Silver CarePlan |
Fluke Calibration Silver CarePlans are available for most calibration products. Please contact your local Fluke Calibration sales representative for details or to request a quote. You may also call the Customer Care Center at 877-355-3225 or send email to [email protected]. |
| On-Demand Webinars |
|---|
| Overcoming Drift: Tips to Maintaining Your PRTs |
Sidebar Request a Quote
Request a quote
We'd like your feedback.
You can help us improve our website »
Thank you!
If you purchased an item from a Fluke authorized distributor, please contact them directly with questions regarding Certificates of Calibration or other documentation.
Support requests for items purchased from, or serviced directly by Fluke and general Metrology questions can be submitted via our online Support Request form and a Fluke representative will be in contact with you.