5606 Full Immersion PRT

PRTs for laboratory freezers, autoclaves, and furnaces

5606: -200 °C to 160 °C
Calibration accuracy of ± 0.05 °C
Transition junction and lead wires can withstand full PRT temperature range
Unique probe seal of 5606 prevents ingress of moisture
NVLAP-accredited calibration

The 5606 Full Immersion PRTs are designed to perform in extreme environments where both the transition junction and the lead wires are required to withstand temperatures covering the entire operating range of the probe. (“Immersion” in this case simply means exposure to temperatures other than ambient and does not necessarily refer to the medium to which the PRT and its components are subjected.)

Applications where “full immersion” of probe, transition junction, and lead wire is required can include calibration or validation of sensors used in laboratory or bio freezers, walk-in refrigerators, autoclaves, ovens, stability test chambers, furnaces or incubators. Other applications might include IQ/ OQ/PQ qualification procedures, temperature mapping, or data logging in temperature controlled spaces or environmental chambers.

The 5606 is just two inches (50 mm) in length with a sheath diameter of 1/8 inch (3.1 mm). Since it can be fully immersed over its entire temperature range, you don’t have to worry about calculating minimum immersion depth— immerse the entire probe, transition junction, and lead wires, in either non-corrosive liquids or dry mediums ranging from –200 °C to 160 °C.

The 100 Ω precision sensing element (alpha = 0.00385) is specially constructed to prevent the ingress of moisture while achieving calibration accuracies as good as ± 0.05 °C. You get both accuracy and flexibility built into a small, durable package.

The lead wires of the 5606 are made of single-conductor enameled copper wire which prevents moisture from wicking to the sensing element as it would if a more common, stranded lead wire were used. The diameter of the lead wire is no greater than 0.2 mm, making it easy to run lead wires through a freezer door to your readout or transmitter with effectively zero energy loss. The 5606 has been proven in common heat transfer fluids such as silicone oil, mineral oil, ethanol, and even liquid nitrogen with no degradation of the transition junction seal or lead wire insulation.

General Specifications

Temperature range

–200 °C to 160 °C

Nominal resistance at 0.01 °C

100 Ω ± 0.1 Ω

Temperature coefficient

0.00385 Ω/Ω/°C

Accuracy[1]

± 0.04 °C at 0.01 °C

± 0.06 °C at 160 °C

Short-term repeatability[2]

± 0.03 °C at 0.01 °C

± 0.04 °C at 160 °C

Drift[3]

± 0.03 °C at 0.01 °C

± 0.04 °C at 160 °C

Hysteresis

± 0.015 °C

Sheath length

50 mm ± 5 mm

(2 in ± 0.2 in)

Sheath diameter

3.1 mm ± 0.1 mm (1/8 in ± 0.004 in)

Sheath material

316 SST

Transition junction temperature range[4]

–200 °C to 160 °C

Sensor length

30 mm ± 3mm (1.2 in ±0.1 in)

Sensor location

3 mm ± 1 mm from tip (1.2 in ± 0.04 in)

Minimum insulation resistance

20 MΩ at 23 °C

Minimum immersion length

Full immersion

Maximum immersion depth in liquid medium

Full immersion

Response time[5]

12 seconds typical

Self heating (in 0 °C bath)

± 0.003 °C

Lead-wire cable type

Enameled copper wire

Lead-wire length

2.4 meters (8 ft)

Lead-wire temperature range

160 °C

Calibration

NVLAP accredited calibration included, lab code 200348-0

[1] Includes calibration and 100 hr drift (k = 2).
[2] Three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k = 2).
[3] After 100 hours at max temp, 95 % confidence (k = 2).
[4] Temperatures outside this range will cause irreparable damage.
[5] Per ASTM E 644.

Calibration uncertainty
	5606
Temperature	1924 Calibration Uncertainty†
-197 °C	0.03 °C
-38 °C	0.03 °C
0 °C	0.03 °C
100 °C	0.045 °C
157 °C	0.05 °C
^† Lab code 200348-0 5606 meets ASTM E 1137 Grade A Classification of Tolerances. R0: Enter the R0 value provided

Model Name	Description
5606-50-X	Sonde, détecteur de température à résistance à immersion, 50 mm, –200 à 160° C X = borne. Spécifiez « A » (INFO-CON pour 914X), « B » (fil nu), « D » (DIN 5 broches pour thermomètres Tweener), « G » (broches en or), « J » (fiches banane), « L » (mini cosses à fourche), « M » (mini fiches banane), « P » (INFO-CON pour 1523 ou 1524) ou « S » (cosses à fourche).

Model Name

Description

5606-50-X

Sonde, détecteur de température à résistance à immersion, 50 mm, –200 à 160° C

X = borne. Spécifiez « A » (INFO-CON pour 914X), « B » (fil nu), « D » (DIN 5 broches pour thermomètres Tweener), « G » (broches en or), « J » (fiches banane), « L » (mini cosses à fourche), « M » (mini fiches banane), « P » (INFO-CON pour 1523 ou 1524) ou « S » (cosses à fourche).

Accessories common to all models:

Accessoire	Description
2603	Étui de transport de sonde de petite taille
1924-4-10	Étalonnage PRT
1930-4-10	Étalonnage de système par comparaison, -200 à 157 °C

Manuels de produits
5606/5607 User’s Guide (English) (281.16 Ko)
5606/5607 User’s Guide Supplement (315.56 Ko)

Notes d'application
Industrial temperature readout and probe selection guide (1.06 Mo)
Does Immersion Depth Really Matter? (745.44 Ko)

Articles
Platinum Resistance Thermometers (PRT)

Communiqués de presse
New full immersion probes from Hart Scientific are designed to perform in extreme environments

Version imprimable »

|||||

Sidebar Request a Quote

Demander un devis

First Name *

Last Name *

Addresse e-mail *

Téléphone (professionnel) *

Company *

Country *

State *

Code Postal *

Please select a product category for this request

Saisissez dans la case ci-dessous tous les produits (et leur quantité) pour lesquels vous souhaiteriez recevoir un devis

Oui, je souhaite recevoir les actualités, les conseils, les formations et d’autres informations par e-mail de la part de Fluke Calibration.

AS - French (Français) [Change]

5606 Full Immersion PRT

PRTs for laboratory freezers, autoclaves, and furnaces

Accessories common to all models:

Sidebar Request a Quote

Secondary menu