COMPASS® for Pressure Version 3 Release Notes

Download COMPASS® for Pressure

Version 3 Releases
3.00.43 (SP1) (2011.02.11)
ADD	CP-802	Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.
CHG	CP-793	An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.
3.00.42 (SP1) (2010.07.07)
ADD	CP-689	Support alternate units of measure and temperature references for the Piston Cylinder effective area.
ADD	CP-775	Added new instruments to the default database.
CHG	CP-786	When [Tools][Feature Options Display]<\ Support Temperature\> is disabled, use the DUT temperature device unit of measure to log temperature data. When the feature is enabled, the temperature unit selected during test initialization defines the unit of measure for the DUT temperature device.
CHG	CP-785	The Final Output Label of a device is displayed on the manual entry dialog to assist in the entering of manual data.
CHG	CP-781	ATM is a supported target for the pressure exercise min or max targets. Click the label next to the field to insert an ATM point.
CHG	CP-766	The build information in addition to the Major and Minor revisions is displayed on the Splash screen during program initialization.
CHG	CP-753	Font size is limited on device run screens to prevent fonts that are too large or small.
CHG	CP-708	[Help][About] dialog uses the new "Fluke- DH Instruments" logo.
CHG	CP-691	A device is now considered "in tolerance" if the error is equal to the tolerance. Previously, a device was "out of tolerance" when the error was equal to the tolerance.
CHG	CP-159	When a macro changes the SN or ID of a device it should also be changed on the various device displays.
CHG	CP-155	Additional COMPASS specific fields are exported to MET/TRACK. See Help file for complete set of fields that are mapped.
CHG	CP-657	The number of test cycle points can be changed from a macro.
CHG	CP-751	When the Data File Name selection in [Tools][Options][Data File] is set to secondary SN, the device serial number is used when the selection does not apply.
FIX	CP-784	Might encounter "Syntax error near '0'" when exporting test data file to MET/TRACK.
FIX	CP-783	Status field logged in the data file does not always update with status codes.
FIX	CP-779	The measurement mode of a profile DUT is not recalled between tests.
FIX	CP-778	Incorrect reference temperature values logged during automated test with an FPG reference.
FIX	CP-762	Export to MET/TRACK, data file resolution was not maintained.
FIX	CP-761	Export to MET/TRACK, option
FIX	CP-760	Removed redundant error messages associated with data files that cannot be exported to MET/TRACK.
FIX	CP-759	A macro run at the end of a test cycle can result in duplicate points made available to a test macro. Data file information is now synchronized prior to calling any test event macros at the end of a test cycle to avoid this problem.
FIX	CP-756	The COMPASS Ready option in a Test Definition would fail to return Ready if the reference and controller used different units of measure.
FIX	CP-755	Output resolution of DHI devices does not always conform to the front panel when the "...Preserve front panel resolution.." option is selected.
FIX	CP-754	Interface macros had a maximum limit of 4 calls per second regardless of the device defined poll interval value.
FIX	CP-752	The label associated with values that are manually entered during a tests were not always correct. In particular, when the raw output type and the final output type were different. For example, Ohms and Temperature.
FIX	CP-747	Target pressure on a PPC could have excessive resolution. The target is now limited to the resolution of the device.
FIX	CP-744	Exporting a COMPASS data file to the Test Data Database might fail if no device information is present in the data record.
FIX	CP-735	Line pressure and temperature fields display on final test initialization step even when the options are disabled.v FIX,CP-719 An error message would display when creating a user defined device when the Output Relationship was set to "Same". The error indicated that a unit must be selected from a drop down list when in fact the list was empty.
FIX	CP-709	Data viewer now shows only relevant columns on the Data grid, with the appropriate column headings.
FIX	CP-703	Effective area unit conversion was performed with limited resolution. This impacted the final area determination which resulted in a faulty piston gauge pressure output.
FIX	CP-695	BSL linearity calculation was incorrect.
FIX	CP-693	If a test point is removed by a macro and the test definition has multiple cycles of line pressure or temperature, the test would loop indefinitely.
FIX	CP-157	Shared command macro information was not exported to external databases using the Database Maintenance Tool.
FIX	CP-659	The Piston Gauge Platform editor displays "PC/MS" tab 2 times. The second tab should display "Sources" instead.
FIX	CP-653	Newly created Mass Bells are not listed in the Piston gauge Editor Mass Bell list.
FIX	CP-650	The True Mass label on the Mass Set Editor is missing. The field displays "kg" only.
FIX	CP-644	Controller list for line pressure includes 2 "Manual Entry" choices.

AS - English [Change]

COMPASS® for Pressure Version 3 Release Notes

Secondary menu