• Other Fluke companies:
  • Fluke
  • Fluke Biomedical
  • Fluke Networks
  • Fluke Process Instruments
See more Fluke brands
Accelix Amprobe Beha-Amprobe Comark Emaint Landauer Pacific Laser Systems Pomona RaySafe Schad
Home
Precision, Performance, Confidence.
Fluke Calibration: Asia
  • Register
  • Log in
  • Contact Us

AS - English [Change]

 

Don’t get fooled: what to look for when buying an isothermal bath

If you’re in the market for an isothermal bath (temperature calibration bath), you may have already noticed that many suppliers provide technical specifications that are confusing or incomplete. You might only be able to find a performance spec for a single temperature point, not for the bath’s whole temperature range. Or they don’t say which bath fluid was used in testing.
 
An isothermal calibration bath is a significant investment so you need to get enough information – and the right information – to help you make the best decision. Here are four key specifications to evaluate:

Temperature range and bath fluids

Often no one bath fluid will work well over an isothermal bath’s entire temperature range. For example, a Fluke Calibration 7341 Deep-Well Compact Bath has a range from -45 °C to 150 °C. Below 0 °C Ethanol is a good fluid, but you’d need another fluid, like silicone oil, at temperatures above that. If you need to cover your bath’s full temperature range, you’ll want to decide between changing bath fluids or using more than one bath unit.

Stability

When a bath maintains a constant temperature over time, we say it is stable. Stability varies at different temperatures but some suppliers only give out one spec at or near ambient, and they don’t mention that it only applies to one temperature or a narrow range. Be sure you understand a bath’s stability over the entire temperature range that you care about.
 
You also need to ask what fluid the manufacturer used when they defined the stability specification, because bath fluid affects stability. For example, at 37 °C a bath is more stable with water as the fluid. If you use oil, you can expect somewhat more instability, and if that oil has high viscosity at 37 °C you can expect even greater degradation.

Uniformity

A bath must be the same temperature throughout the test zone where you’ll make your measurements. The uniformity specification defines the peak value for this error source. The more probes you test, the larger the test zone – and the more important uniformity becomes.
 
Uniformity depends mostly on the way the bath fluid is mixed. Does the bath use a circulator pump for mixing? If so, are there thermal flow patterns in the bath that interfere with uniformity? Check both the vertical and horizontal temperature gradients.

Tank size

How many probes and sensors do you need to calibrate? If your workload is large, you may want to look for an isothermal bath with a large tank size.  What about the length of your sensors? Longer SPRTs, PRTs and liquid-in-glass thermometers require a bath with plenty of immersion depth. What about oddly-shaped sensors? If you are calibrating tri-clamp sanitary sensors, for example, you should look for a bath that accommodates them (by the way, we make baths like that: the 6109A and 7019A Portable Calibration Baths).
 

Would you like more details about choosing an isothermal or temperature calibration bath?

You’ll find them here:
Buying the right temperature calibration bath for your laboratory application note
Tips for Selecting and Using Bath Flukes on-demand webinar
How to select a calibration fluid application note
 
You can also get live help from one of our isothermal bath application experts who will help you evaluate specifications to ensure you’re covered.
 
Speak with an expert

Steve Potter, Global Marketing Manager at Fluke Calibration
Posted by Steve Potter on Mar 20, 2018
Steve Potter was the Global Marketing Manager for Temperature Calibration products. His responsibilities included go-to-market strategy and coordination with regional teams worldwide, new product introductions, brand awareness, product promotion, and content development. He is a graduate of Brigham... Full Bio
  • Login or register to post comments
  • Printer-friendly version »
  • Home
  • Products
    • New Products
    • Electrical Calibration
      • Electrical Standards
      • Electrical Calibrators
      • Bench Multimeters
      • Electrical Calibration Software
    • RF Calibration
      • RF Reference Sources
      • RF Calibration Accessories
      • RF Calibration Software
    • Data Acquisition and Test Equipment
      • Bench Multimeters
      • Data Acquisition
      • Data Acquisition Software
    • Temperature Calibration
      • ITS-90 Temperature Standards
        • ITS-90 Fixed-point cells
        • Standard Platinum Resistance Thermometers
        • Maintenance Apparatus
        • Liquid Nitrogen Comparison Calibrator
        • Resistance Bridges
        • Standard Resistors
      • Calibration Baths
        • Compact Calibration Baths
        • Standard Calibration Baths
        • Special Application Baths
        • Bath Accessories
        • Bath Controllers
        • Bath Fluids
      • Industrial Calibrators
        • Field Metrology Wells
        • Metrology Wells
        • Handheld Calibrators
        • Field Dry-Block Calibrators
        • Micro Baths
        • Infrared Calibrators
        • Thermocouple Furnaces
        • Dual Block Dry-Well
        • Zero-point Dry-Well
      • Probes / Sensors
        • Platinum Resistance Thermometers (PRTs)
        • Thermistors
        • Thermocouples
      • Digital Thermometer Readouts
      • Multifunction Calibrators
      • Temperature Calibration Software
    • Humidity Calibration
      • Humidity Generators
      • Humidity Data Loggers and Monitors
    • Pressure Calibration
      • Piston Gauges
        • NMI Piston Gauges
        • Absolute Piston Gauges
        • High Pressure Pneumatic Piston Gauges
        • Hydraulic Piston Gauges
        • Piston Gauge Accessories
      • Automated Pressure Controller / Calibrators
        • Low Pressure Controllers / Calibrators
        • Pneumatic Pressure Controllers / Calibrators
        • High Pressure Pneumatic Controller / Calibrators
        • Hydraulic Controller / Calibrators
      • Pressure Monitors
        • Low Pressure Monitors
        • Digital Pressure Gauges
        • Reference Pressure Monitors
      • Deadweight Testers
        • Pneumatic Deadweight Testers
        • Oil Deadweight Testers
        • Water Deadweight Testers
        • High-Pressure Hydraulic Deadweight Testers
        • Deadweight Tester Accessories
      • Manual Pressure Calibration
        • Pressure Calibrators
        • Pneumatic Pressure Control
        • Hydraulic Pressure Comparators / Pumps
      • Handheld Pressure Calibrators
      • Air Data Calibration
      • Environmental Monitors
      • Pressure Calibration Accessories
      • Pressure Calibration Custom Systems
      • Pressure Calibration Software
    • Flow Calibration
      • Gas Flow Standards
      • Gas Flow Accessories
      • GFS Primary Gravimetric Flow Standard
      • Flow Calibration Software
    • Process Calibration Tools
      • Temperature Calibrators
        • Handheld Temperature Calibrators
        • Dry-Block Calibrators and Micro-Baths
        • Precision Digital Thermometers
        • Temperature Probes
        • Infrared Calibrators
        • Hygro Thermometer with Data Logging
      • Pressure Calibrators
        • Digital Pressure Calibrators
        • Handheld Pressure Calibrators
        • Deadweight Testers
        • Precision Digital Pressure Gauges
        • Calibration Hand Pumps
      • Multifunction Calibrators
      • mA Loop Calibrators
      • Process Calibration Software
    • Calibration Software
      • MET/CAL® Software
      • MET/CAL® Support
      • Asset Management Software
      • Temperature Calibration Software
      • Pressure Calibration Software
      • Flow Calibration Software
      • Mechanical / Dimensional Calibration Software
    • Service and Support
    • All Calibration Instruments
  • Purchase Info
    • Where to Buy
    • Request a Quote
    • Request a Demo
    • Request a Sales Consultation
    • Certified Pre-Owned Equipment
    • General Services Administration (GSA)
    • Financing Program
    • National Stock Numbers (NSNs)
    • Payment Options and Tax Info
  • News
    • Press Releases
    • Promotions
    • Industry Links
    • Metrology Salary Survey
  • Training and Events
    • Conferences and Exhibitions
    • Training Courses
    • User Group Meetings
    • Web Seminars
      • Live Seminars
      • On-Demand Seminars
  • Literature and Education
    • Education Hub
    • About Calibration
    • Articles and Education
    • Product Literature
    • Product Manuals (User Guides)
    • Videos and Virtual Demos
    • Blog
  • Service and Support
    • Service Request (RMA)
    • Service Plans
    • Technical Support
    • Knowledge Base
    • Accreditations
    • Authorized Service Centers
    • Calibration Certificates
    • Community Forum
    • My MET/SUPPORT
      • Activate
      • Procedures
      • Software
      • Technical Bulletins
      • Priority Support
      • Manuals
    • Product Manuals (User Guides)
    • Safety Data Sheets (SDS)
    • Safety, Service, and Product Notices
    • Software Downloads
    • Tools
      • PT100 Calculator
      • ITS-90 Reference Function Calculator
      • Thermocouple Table Voltage Calculator
      • Thermocouple Voltage to Temperature Calculator
  • About Us
    • Contact Us
    • Visit Us
    • Employment
    • Fluke Calibration
      • Hart Scientific Temperature Calibration
      • DH Instruments Pressure and Flow Calibration
      • Pressurements Pressure Calibration
      • Ruska Pressure Calibration
    • Fluke Companies
    • Integrity and Compliance
    • Frequently Asked Questions
Home|Blog|Don’t get fooled: what to look for when buying an isothermal bath
©1995-2023 Fluke Corporation
             

Secondary menu

  • Disclaimer
  • Privacy Statement
  • Terms of Use
  • Terms of Sale